10 Inch Sand Suction Dredger with Sand Pump

• Customization: Available
• Type: Cutter Suction Dredger
• Power Type: Diesel
• Model NO.: 10 inch cutter suction dredger
• Cyclone Type: No
• Slot Type: No
• Customized: Customized
• Condition: New
• Size: 10 Inch
• Transport Package: Container
• Specification: ISO/SGS/CE
• Trademark: JULONG
• Origin: China
• HS Code: 89051000
• Production Capacity: 100 Sets/Year

Product Description

The JULONG 10 inch Cutter Suction Dredger of steel construction, the non self-propelled, dismountable type, is able to berth and dredge at any waters both in the coastal area and inland rivers, with similar conditions to that in navigation area "A" or below the "A"-line specified in code for inland river steel engineering ship manufacture of P.R.China.
The dredger can be used to excavate and transport cohesive sediment below the class III specified in code for dredging engineering construction technique issued by Ministry of Water Resources(MWR) of P.R.China.
In the course of technical designing, we have considered special requirements for local tropical climate conditions such as meteorological and waters distributing state etc.
It's hull consists of a main pontoon and two side pontoons. is to be easy to dismantle or mount for transportation by road, rail or water, and is to be easy to reassemble at project site.The engines and dredge pump are located in the center pontoon,the 2 side pontoons serve as fuel bunkers,ballast tanks and store.
The dredger is powered by diesel engines. The main diesel engine is to drive the dredge pump, and in the free end of the engine, one set of power distributor is equipped, to supply power for all other equipments such as cutter, swing and ladder winches, and the spud rams etc.
The spacious control cabin is ergonomically designed  with 360 degree view. All the operation buttons, swifts, indicators, gauges are equipped on the control desk. Only two operators can control all the dredger in the operation room.
The dredger is painted by 4 layers of marine paint to protect from the corrosion. The ZINC anode can be used to give better anti-corrosion function.

Principle Dimensions
(1)  Length overall	25.0m
(2)  Breadth	5.4 m
(3)  Depth	1.6 m
(4)  Dredging Depth	10.0 m
(5)  Discharge Distance	800 m
(6)  Water Flow	1200 m3/hr
(7)   Sand Capacity	150 m3/hr -200 m3/hr
(8)  Total Power	559KW		Cummins Engine
3.   Main Pontoon
(1)  Length	11.5 m
(2)  Width	2.2 m
(3)  Depth	1.6 m
(4)  Plate Thickness- Sides	8 mm		CCSB Steel Plate
(5)  Plate Thickness- Bottom	10 mm		CCSB Steel Plate
4.   Side Pontoons
(1)  Length	16 m
(2)  Width	1.6 m
(3)  Depth	1.6 m
(4)  Plate Thickness- Sides	6 mm		CCSB Steel Plate
(5)  Plate Thickness- Deck	5 mm		CCSB Steel Plate
(6)  Plate Thickness- Bottom	8 mm		CCSB Steel Plate
5.   Dredging Pump
(1)  Made	Shijiazhuang Pump		Australia Warman Technology,  Best Pump in China
(2)  Model	12/10 G-G
(3)  Head	40-65m
(4)  Speed	500_650 r/min
(6)  Particle clearance	144mm
(5)  Water Flow	1200 m3/hr
6.   Main Engine
(1)  Manufacturer	Cummins
(2)  Model	KTA19
(3)  Rated Power with RPM	559KW@ 1800 RPM
(4)  Configuration	In line,6 cylinder, 4-stroke
(5)  Aspiration	Turbocharged /After cooled
(6)  Rotation	Counterclockwise facing flywheel
(7)  Amount	1 set
7.    Gear Box
(1)  Manufacturers	Hangzhou Xiaoshan
(2)  Model	TJF750
(3)  Amount	1 set
8.   Cutter
(1)  Type	Crown
(2)  Wearing parts	Replaceable Alloy Teeth
(3)  Driver	Hydraulic Motor
(4)  Diameter	1000mm
(5)  Cutter Shaft Power	60 kw
(6)  Cutting Speed in rpm	0-30
(7)  Amount of Blades Teeth	30 pieces
9.    Ladder Winch
(1)  Line Pull - Second Layer	40 KN
(2)  Line Speed - Second Layer	0-20m/min
(3)  Wire Size	Φ16mm
(4)  Driver	Hydraulic Motor
10.  Swing Winch
(1)  Line Pull - Second Layer	40 KN
(2)  Line Speed - Second Layer	0-20m/min
(3)  Wire Size	Φ16mm
(4)  Driver	Hydraulic Motor
11.  Spuds
(1)  Amount	2
(2)  Diameter	377 mm
(3)  Thickness	16 mm
(4)  Length	14 m
(5)  Material	16 Mn
(6)  Drive	Hydraulic Ram
(7)  Hydraulic Ram Stroke	2.0m
(8)  Dia. of Hydraulic Ram Core	125mm